This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.

The DGRTM 6175 repeater is a continuously operating unit that supports two simultaneous voice and data paths in digital TDMA mode. Easily mounts to wall or shelf systems. The DGR 6175 repeater is part of the MOTOTRBO system that provides increased capacity, spectrum efficiency, enhanced voice and integrated data communications through a complete solution.

This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload and short-circuit protection. The unit allows charging of up-to 3 separate battery banks.

• Max Continuos Power 1500W
• Peak Load Power Rate up to 3000W
• For use with 12V System
• No Load Current Draw (Typical) 1.5A
• Waveform Modified Sine Wave
• Input DC Voltage Range 11V to 15V
• Usb Output 5V x 2.1A

Cable UTP Cat-6

• 100% COPPER,
• BRAND: ELECON
• BLUE COLOR FOR OUTDOORS
• APPLICATIONS: INTERNET, SECURITY CAMERAS, ETC