Specifications:

• Capacity: 1700mAH. Battery
• Type: lithium ion battery.
• Voltage: 7.4 V.
• Color: Black
• 100% brand new
• Suitable for: Baofeng EP450 DEP450

Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management.

Improved Noise Immunity

The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload and short-circuit protection. The unit allows charging of up-to 3 separate battery banks.

The Motorola EM400 ™ industrial mobile radio provides a wide range of important features to increase the performance of your business operations. Among these functions we can mention: the double priority scan allows to increase the monitoring frequency of a certain channel. It has several features that highlight its performance: 32 channels, 8 alphanumeric characters display, sending and receiving PTT-ID, selective radio inhibition, dual priority tracking, 4 programmable buttons, integrated VOX, among others. To optimize the performance of your radios, Motorola has a wide range of Genuine Accessories to meet each of your communication needs.

• Max Continuos Power 200W
• Peak Load Power Rate up to 400W
• For use with 12V System
• No Load Current Draw (Typical) 0.4A
• Waveform Modified Sine Wave
• Input DC Voltage Range 11V to 15V
• Usb Output 5V x 2A

Key Features

• Frequency Range: 400-470 MHz
• 128 Channels/128 Zones
• 25 Watts RF Output
• Emergency Mode
• QT & DQT Signalling plus DTMF PTT ID
• 5-Tone Encode/Decode
• Electronic Serial Number
• MDC-1200 Signalling (requires special license ID)
• D-Sub 15 pin Interface Connector
• Requires Optional Microphone