TK-8360H UHF Radio

Marca: Kenwood

Key Features

  • Frequency Range: 400-470 MHz
  • 128 Channels/128 Zones
  • 25 Watts RF Output
  • Emergency Mode
  • QT & DQT Signalling plus DTMF PTT ID
  • 5-Tone Encode/Decode
  • Electronic Serial Number
  • MDC-1200 Signalling (requires special license ID)
  • D-Sub 15 pin Interface Connector
  • Requires Optional Microphone
 

Política de seguridad (editar con el módulo Información de seguridad y confianza para el cliente)

 

Política de envío (editar con el módulo Información de seguridad y confianza para el cliente)

 

Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente)


Key Features

Frequency Range: 400-470 MHz
128 Channels/128 Zones
25 Watts RF Output
Emergency Mode
QT & DQT Signalling plus DTMF PTT ID
5-Tone Encode/Decode
Electronic Serial Number
MDC-1200 Signalling (requires special license ID)
D-Sub 15 pin Interface Connector
Requires Optional Microphone

Supplied With

D.C. Cable Yes
Fuse Yes, 10 A
Instruction Manual Yes, English, Spanish, German, French, Dutch, Italian, Turkish & Greek
Mounting Bracket Yes
Screw Set Yes


FleetSync Signalling Features

External-device Switching Yes, External devices can be switched (via the AUX output) on receipt of a status ID code
Paging Call Function Yes
PTT ID Digital ANI Yes
Selective Calling Yes
Short/Long Text Messages Yes
Status Messaging Yes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory.

MDC1200 Signalling Features

Emergency Encode/Decode Yes
PTT ID Encode/Decode Yes
Radio check Decode Yes
Stun/Revive Decode Yes

Options

Internal GPS Board Yes - NMEA 0183 V2 compatible
"Molex" interface Via KCT-60M Cable
Voice Guide & Storage Yes

Applicable Standards

R&TTE: EN300 086, 300 113, 300 219, 301 489 Yes
EU Safety: EN60065, 60950-1, 60215 Yes
Factory Quality Certification and Location ISO 9001. Manufactured in Singapore
For use in the EU Yes
IP54 Yes
MIL-STD 810 C/D/E/F/G Yes

Technical Specifications

Frequency Range - E Type 400-470 MHz
Number of Channels 128
Number of Zones 128
Channel Frequency Spread 70 MHz
Channel Spacing - Analogue - Wide/Mid/Narrow 25 kHz/20 kHz/12.5 kHz
Antenna Impedance - 50 Ohm Yes
Current Drain Standby: 0.3 A
Receive: 1.0 A
Transmit: 8.0 A
Frequency Stability ± 2.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range -30 °C to + 60 °C
Operating Voltage 13.2 V DC ± 15%
PLL Channel Steps 5.0 kHz/6.25 kHz
Dimensions 160 x 43 x 136 mm (Projections not included)
Weight (net) 1.2 Kg

Receiver Specifications

Adjacent Channel Selectivity Wide/Mid/Narrow - 70/70/60 dB
Audio Output 4 W with less than 5% distortion
Intermodulation 67 dB
Sensitivity - EIA 12 dB SINAD 0.28 µV at 25 kHz
0.28 µV at 20 kHz
0.35 µV at 12.5 kHz
Spurious & Image Rejection 70 dB

Transmitter Specifications

RF Power Output (High/Low) 25 W / 5 W
FM Noise (EIA) Wide/Mid/Narrow: 45/45/40 dB
Microphone Impedance 600 Ohm
Modulation Distortion (Wide/Mid/Narrow) Less than 3%
Modulation Limiting ± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN) -36 dBm ≤ 1 GHz
-30 dBm > 1 GHz
019048194534

Data sheet

Potencia
25W
Banda
UHF (450Mhz - 520Mhz)
Canales
128 channels

Specific References

New product

Download