800W Nippon American Inverter
Marca: Nippon America
- Max Continuos Power 800W
- Peak Load Power Rate up to 1600W
- For use with 12V System
- No Load Current Draw (Typical) 0.9A
- Waveform Modified Sine Wave
- Input DC Voltage Range 11V to 15V
- Usb Output 5V x 2A
- Protetion Overload and Short-Circuit
- Replaceable 30A Fuse
- Cooling Fan Built-In
- 2 120V AC 3 Prong Grounded Receptacle
- Overload Indicator
- 18 AWG 24" Cigarret Plug Cable
Política de seguridad (editar con el módulo Información de seguridad y confianza para el cliente)
Política de envío (editar con el módulo Información de seguridad y confianza para el cliente)
Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente)
- Max Continuos Power 800W
- Peak Load Power Rate up to 1600W
- For use with 12V System
- No Load Current Draw (Typical) 0.9A
- Waveform Modified Sine Wave
- Input DC Voltage Range 11V to 15V
- Usb Output 5V x 2A
- Protetion Overload and Short-Circuit
- Replaceable 30A Fuse
- Cooling Fan Built-In
- 2 120V AC 3 Prong Grounded Receptacle
- Overload Indicator
- 18 AWG 24" Cigarret Plug Cable
16 other products in the same category:
Battery charger 12V x 50A
This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Battery charger 12V x 30A
This advanced fully automatic three-stage 30 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.
Inverter 12 to 120V - 1000W...
This high efficiency DC-AC inverter converts 12 Volts DC to 1000 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. Features include built-in electronic GFCI, overload protection, low battery alarm / shut down, low idle power draw. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.
1000W Nippon American Inverter
- Max Continuos Power 1000W
- Peak Load Power Rate up to 2000W
- For use with 12V System
- No Load Current Draw (Typical) 0.4A
- Waveform Modified Sine Wave
- Input DC Voltage Range 11V to 15V
- Usb Output 5V x 2A
- Protetion Overload and Short-Circuit
- Replaceable 3 x 40A Fuse
- Cooling Fan Built-In
- 2 120V AC 3 Prong Grounded Receptacle
- Overload Indicator
- cable included
UTP Cat-5e Double Jacket
Cable UTP Cat-5e Double Jacket
- 100% COPPER,
- BRAND: ELECON
- BLACK COLOR FOR OUTDOORS
- APPLICATIONS: INTERNET, SECURITY CAMERAS, ETC
3000W Nippon American Inverter
- Max Continuos Power 1500W
- Peak Load Power Rate up to 3000W
- For use with 12V System
- No Load Current Draw (Typical) 1.5A
- Waveform Modified Sine Wave
- Input DC Voltage Range 11V to 15V
- Usb Output 5V x 2.1A
- Protetion Overload and Short-Circuit
- Cooling Fan Built-In
- 2 120V AC 3 Prong Grounded Receptacle
- Overload Indicator
- Wired Remote Control Included