Cargador Para Radio Portátil Motorola Ep450 Dep450 Original
Marca: Motorola
Política de seguridad (editar con el módulo Información de seguridad y confianza para el cliente)
Política de envío (editar con el módulo Información de seguridad y confianza para el cliente)
Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente)
16 other products in the same category:
12V to 120V Inverter 300w...
This high efficiency DC-AC inverter converts 12 Volts DC to 600 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. Features include built-in electronic GFCI, overload protection, low battery alarm / shut down, low idle power draw. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.
TK-7360H VHF Radio
Key Features
- Frequency Range: 136-174 MHz
- 128 Channels/128 Zones
- 25 Watts RF Output
- Emergency Mode
- QT & DQT Signalling plus DTMF PTT ID
- 5-Tone Encode/Decode
- Electronic Serial Number
- MDC-1200 Signalling (requires special license ID)
- D-Sub 15 pin Interface Connector
- Requires Optional Microphone
Battery For Motorola...
Specifications:
- Capacity: 1620mAH. Battery
- Type: Lithium.
- Voltage: 7.4 V.
- Color: Black
- 100% brand new
- Suitable for: Motorola PRO5150
PRO3100 Radio
Professional Mobile Radio
Motorola's PRO3100 radio provides you with a simple and reliable business solution that provides the basic functions to keep your work teams active and in constant contact.
Ideal for organizations with moderate communication requirements, the PRO3100 radio offers simple, yet high-performance functionality. Its main features provide the essentials to maintain constant and efficient communication, including limited signaling capabilities and two programmable buttons.
Battery charger 12V x 50A
This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
MPPT Solar Charge Controller
- Brand: Sestecom C.A.
- Model: MPPT-40A - MPPT-60A
- Battery Voltage: 12v / 24v / 36v / 48v
- PV Max vol: 150VDC
- Max. Power: 520w 12v / 1040w 24v / 1560w 36v / 2080w 48v
- Max Cur: 40A (MPPT-40A) o 60A (MPPT-60A)