• Max Continuos Power 1500W
• Peak Load Power Rate up to 3000W
• For use with 12V System
• No Load Current Draw (Typical) 1.5A
• Waveform Modified Sine Wave
• Input DC Voltage Range 11V to 15V
• Usb Output 5V x 2.1A

• 10amp, 12amp overload
• convert 117v from C.A to 13.8 C.D
• low ripple
• internal protection for overload

Specifications:

• Capacity: 1450mAH. Battery
• Type: NI-MH.
• Voltage: 7.2 V.
• Color: Black
• 100% brand new
• Suitable for: Gp/pro5150/7550 Series

This advanced fully automatic three-stage 30 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.

CABLE ATHW 14AWG 1 Wire

•      100% COPPER,
•      BRAND: Elecon

CABLE THW 6AWG 7 Wires

•      100% COPPER,
•      BRAND: Elecon

Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management.

Improved Noise Immunity

The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Specifications:

• Capacity: 1700mAH. Battery
• Type: lithium ion battery.
• Voltage: 7.4 V.
• Color: Black
• 100% brand new
• Suitable for: Baofeng EP450 DEP450