Battery charger 12V x 15A

Marca: Samlex Power

This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload and short-circuit protection. The unit allows charging of up-to 3 separate battery banks.

Voltaje de Entrada
 

Política de seguridad (editar con el módulo Información de seguridad y confianza para el cliente)

 

Política de envío (editar con el módulo Información de seguridad y confianza para el cliente)

 

Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente)

This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload and short-circuit protection. The unit allows charging of up-to 3 separate battery banks.

  • High efficiency
  • Commercial Grade
  • Lightweight
  • Quiet operation
  • Industry Proven Design – 1000s of units in operation
  • 2 or 3 stage charging (user selectable)
  • 120 VAC, 50/60 HZ (default) or 230 VAC, 50/60 Hz (internal jumper setting)
  • Voltage meter display – Ammeter and LED power status
  • For all types of Lead Acid batteries
  • Charge with a battery load or stand alone
  • Use as a power supply or DC UPS
  • UPC: Universal Protection Circuit – short circuit, overload, reverse battery polarity
  • Charge 3 banks of batteries at once – no isolator necessary

Input 120 VAC, 50/60 Hz (default) or 230 VAC 50/60 Hz (internal jumper setting)
Output 12 VDC
Amps 15 Amps
Weight 4.8 (lbs)
Weight 2.2 (kg)
Dimensions       8.6 x 8.4 x 3.3 (in)
Dimensions 21.8 x 21.4 x 8.3 (cm)
Safety Intertek-ETL listed: Conforms to ANSI/UL Standard 1564 ; Certified to CAN/CSA STD. C22.2 No. 107.2

  • Automotive
  • Recreational vehicles
  • Marine
  • Communications sites
  • Battery back-up systems
SEC1215

Specific References

Download

Manual de Usuario - SEC-1230UL

size (2.11M)

Hoja de Datos - SEC1215UL

size (438.74k)

2 other products in the same category:

Samlex Power
Quick view

Battery charger 12V x 30A

Marca: Samlex Power

This advanced fully automatic three-stage 30 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.

5 1
Samlex Power
Quick view

Battery charger 12V x 50A

Marca: Samlex Power

This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.

5 1